Buyers look at the job first. Then they pick a glove that fits the danger. They check the material, the coating, the rating and the size. 마지막, they ask the supplier for proof. This is how to choose industrial safety gloves without guessing.
이 가이드에서는, you will read about five things. They are hazards, materials, ratings, fit and supplier checks. 상하이 Zimai 안전 기술 유한 회사, 주식회사. (Zimai) wrote it. ZIMAI makes and supplies PPE. 끝났어 30 수년간의 수출 경험. PPE means personal protective equipment. All product facts come from the ZIMAI website.
How to Choose Industrial Safety Gloves in Five Steps
Five steps help you pick the right glove. Do them in order.
- Find the hazards. Write down what can hurt the hands in each job.
- Pick the material. Choose the liner and coating that fit the job.
- Check the ratings and papers. Read the levels. Ask for certificates.
- Check fit, grip and comfort. Try a sample on the real job.
- Ask for the data sheet. It lists the exact facts for one model.

Start With a Hazard Assessment of the Job
A hazard assessment is the first step in how to choose industrial safety gloves. Everything that might cause harm to a worker’s hands is listed in writing. ZIMAI have a simple rule. Safety goggles should be used after the use of any other controls.
The hazard must be appropriate for the glove. The one wearing it must be comfortable. There has to be compatibility with other personal protective equipment (PPE) that is worn concurrently.
Cuts, tears, and sharp edges
Sharp edges can cut or tear skin. So cut protection matters here. ZIMAI lists cut-resistant gloves 그리고 mechanical gloves .
Oils, chemicals and wet work
Chemical exposure and wet work need coated gloves. ZIMAI lists nitrile (NBR) , PVC and rubber gloves for this work.
열, sparks and electrical work
ZIMAI lists aluminized, leather welding and dielectric gloves. The site gives no ratings for them. So none are shown here.
Impact and vibration
ZIMAI lists anti-impact, anti-vibration and TPR-back gloves. TPR means thermoplastic rubber.
One specification line for each task
ZIMAI has a five-step method. The steps are register, 일, 노출, residual risk and specification. Residual risk is the danger left after other controls.
Write one spec line for each task. Spec is short for specification. It is a short note on what you need. It has six parts. They are glove type, hazard, standard or level, 크기 범위, fit notes and proof needed. ZIMAI explains this in its hazard-based PPE procurement article .
Which glove family fits which hazard?
| 위험 | Where it shows up | Glove family on the ZIMAI site |
| Cuts and sharp edges | 블레이드, sheet edges, cutting tasks | Cut-resistant, mechanical |
| 기름, 약, 젖은 작업 | 청소, dipping, liquid handling | Nitrile (NBR), PVC, 고무 |
| 열, sparks, electrical | Welding, hot work, live work | 알루미늄 도금, leather welding, dielectric |
| Impact and vibration | Heavy tools, struck by risks | 충격 방지, anti-vibration, TPR-back |
Which Glove Material Fits Which Task?
Glove material means the liner and the coating. They protect the hand. Pick them to fit the task. This is how to choose industrial safety gloves by material. HPPE means high-performance polyethylene. It is a strong fiber.
Materials and ZIMAI models
| 재료 | Typical task | ZIMAI model examples |
| Nitrile (NBR) coated knit | General handling | 12185: 15 gauge cotton and lycra liner, black sandy nitrile on the palm. 11115: 15 gauge nylon and lycra liner, black micro-foam nitrile on the palm. 10120: blue nitrile fully coated, jersey liner, safety cuff |
| HPPE-liner cut-resistant | Cut hazards | 71258: 18 gauge gray HPPE liner, water-based foam nitrile on the palm, cut level D. 71613: 13 gauge gray HPPE liner, cut level C. HPPE sleeves also exist, such as 76635 |
| 아라미드 | Cut hazards | Gloves and sleeves, such as 74400 그리고 76335 |
| Stainless steel chainmail | Cut hazards | 76350: 304L stainless steel ring, protects the thumb, 검지와 중지 |
| 가죽 | Welding, driving | 46110: red cow split leather welding glove, full lined. Cow split, pig grain, pigskin and cow grain driver gloves are also listed |
| PVC and rubber | Chemical work | 36530: 15 게이지 블루 코튼 라이너, blue smooth and sandy PVC coat, 30 cm length. 24020: black/orange rubber industrial gloves, crinkle finish |
| 진동 | Vibrating tools | 90217: 7 gauge polyester liner, black foam rubber on the palm and back |
| 영향 | Impact hazards | 48300: synthetic leather with PVC finger protection and a Velcro wrist closure |
Glove Grip: How Palm Coatings Differ
Glove grip starts with the palm coating. ZIMAI lists sandy, micro-foam, 매끄러운, crinkle (유액), foam and dotted palms. This guide does not rank them. The site gives no grip data.
Sandy feels rough, like sand. Micro-foam has a fine foam surface. Smooth is flat. Crinkle is a wrinkled latex finish. Dotted palms have small raised dots.

Finish and model examples
| Finish | ZIMAI model |
| Sandy | 12185 |
| Micro-foam | 11115 |
| Smooth NBR | 10103 |
| Crinkle latex | 20103 |
| Micro-foam with dots | 11125 |
손바닥 안에 감추다, 3/4 and full coating
Coating also differs by how much of the glove it covers. A palm-coated glove, such as 12185, is coated on the palm only. 에이 3/4 coated glove, such as 10130, is coated past the palm. A fully coated glove, such as 10120, is coated all over.
12223 is a sandy NBR double fully coated glove. It has blue smooth nitrile, 완전히 코팅된. It also has black sandy nitrile on the palm and thumb.
Cut Protection and Abrasion Resistance: Reading the Ratings
Cut protection shows as a cut level on some ZIMAI models. 71258 lists level D. 71613 그리고 78473 list level C. 72410 EN 목록 388 puncture level 2 on the palm. It lists cut level 5 on the full hand. It also has a fingertip that works with touchscreens.
Why a level is not enough
안에 388 is a European standard. It is for gloves that guard against mechanical risks, like cuts and punctures. The site does not say which standard its letter levels (C and D) follow. So do not compare them with levels from other brands. Read the data sheet for the exact model.
What to ask about abrasion resistance
Abrasion resistance is how well a glove holds up to rubbing and wear. The site gives no abrasion numbers. Ask the supplier what the data sheet says for your model.
Cut plus impact
78473 is an anti-cut and anti-impact glove. It has a hi-vis yellow 13 gauge HPPE liner. It has red sandy nitrile on the palm. It also has red TPR on the back.
Chemical Exposure and Oily Work: What to Look For
Chemical exposure needs four steps. Take them in order.
- Name the liquid.
- Say how it touches the glove: a splash or a full dip.
- Choose a coating type.
- Ask for the data sheet.
ZIMAI’s chemical-resistant gloves by duty
- Light duty: 36200, 36210
- Moderate duty: 36410, 36420
- Heavy duty: 36530, 36535
- 겨울: 36800 series
- ESD chemical resistant: 36400
- Arc-resistant and chemical resistant: 37000
- 안티 컷, anti-chemical and anti-impact: 37100
ESD means electrostatic discharge. ZIMAI also lists nitrile gauntlets (14000 series) and neoprene (24010). Gauntlets have a long cuff. Neoprene is a type of rubber.
The site gives no chemical resistance data. So ask for the data sheet for your chemical.
Dexterity, Comfort and Long Shifts
Dexterity is how well your fingers can do fine work in a glove. Glove grip and dexterity both change how a glove feels on a long shift. Gauge tells you how fine the knit is. A higher number means a finer knit.
- 18 계량기: 71258
- 15 계량기: 12185, 11115
- 13 계량기: 71613
- 7 계량기: 90217
ZIMAI lists thin gloves and touchscreen gloves. 71038 그리고 72410 are for touchscreen use.
Comfort features on the site
- Seamless liners
- 안전 커프 (10120)
- 벨크로 손목 잠금장치 (48300)
- Thermal knitted gloves
ZIMAI lists latex-coated and nitrile-coated gloves. It makes no claims about allergies.
Glove Sizing: How to Get the Fit Right
Glove sizing is the last check in how to choose industrial safety gloves. The ZIMAI site shows sizes in two ways. One is a number, like 7 또는 11. The other is a letter, like S or XXL. Many models show both, such as 7/S.
Listed sizes by model
| 모델 | Listed sizes |
| 71258 | 7/S–11/XXL |
| 12185 | 6/XS–11/XXL |
| 11115 | 6/XS–11/XXL |
| 24020 | 7/S–10/XL |
| 48300 | S/7–10/XL |
| 76350 | 에스, 중, 엘, 특대 |
Test a sample on the real task before a big order. Ask the supplier for a size chart. The site has none.

Which Standards and Certificates Should You Ask For?
Ask for the certificate and the data sheet for the exact model. ZIMAI says:
- Most working gloves, 안전화, masks and Hi-Vi workwear are CE certified. CE is a European product mark.
- Other PPE shares tests and certificates with strategic suppliers in China.
- The site has a Standard section with an “EN 보호 장갑 표준” 페이지.
- Each product has a data sheet.
See also PPE에 대한 CE 마킹: 표준, 테스트 및 문서 and What Belongs in a Model-Specific PPE Compliance File Before Purchase?
What Goes Into the Cost of Industrial Safety Gloves
The ZIMAI site shows no prices. Ask for a quote. 지마이의 reusable vs disposable article lists these costs:
- 구매 가격
- 교체율
- 청소
- 검사 및 보관
- 훈련
- Disposal
- 가동 중지 시간 및 재고
It also gives two simple formulas:
- 총 소유 비용 = 구매 + 청소 + 점검 + 대사 + 처분
- Cost per use = total cost ÷ number of uses
지마이의 disposable range 포함 15010 그리고 15020 (nitrile), 24040 (유액) 그리고 35020 (vinyl).
Common Mistakes Buyers Make
- Buying only by the category name
- Skipping the hazard check
- Not checking glove sizing and the size range
- Not asking for the data sheet
- Picking by price alone
- Forgetting who wears the gloves, what the task is, or what other PPE they wear
How to Check a Glove Supplier Before You Order
Supplier proof is part of how to choose industrial safety gloves. ZIMAI’s About page says:
- ISO 인증을 받았습니다 9001:2015 ISO 14001:2015.
- Some of its plants are audited to SEDEX and BSCI. These are factory audit programs.
- 끝났어 30 수년간의 수출 경험. It is based in Shanghai (송장).
- 무역 박람회: A+A Düsseldorf 2023 그리고 2025, NSC 덴버 2025 and a Canton Fair.
The site says “in time delivery.” It gives no number of days. Ask for the lead time in your quote. See also PPE 인증서는 다른 공장의 이름을 지정합니다. and Can a PPE Factory Have Both SMETA and amfori BSCI Audits?
How to Send Your Glove Request to ZIMAI
Send ZIMAI five details. They are the task, the hazard, the model or glove type, the size range and the proof you need.
- 이메일: sales@zmsafety.cn
- 핸드폰: +86-21 67766378
- Hours: 월요일부터 금요일까지, 8.30am–6pm
- Online: fill in the 견적을 받으십시오 form
다음으로 시작하세요. Hand Protection category . You can also open product pages such as 71258 , 72410 그리고 78473 .
자주 묻는 질문
-
Which safety gloves are suitable for oily industrial work?
ZIMAI’s nitrile (NBR) coated gloves are a good place to start. They come in sandy, micro-foam and smooth finishes (12185, 11115, 10120). Its PVC and rubber chemical gloves also fit. The site makes no oil-resistance claim in its product text. So check oil resistance on the model’s data sheet.
-
How do I choose the right safety gloves?
Start with the hazard. 그다음 재료를 골라주세요, coating, rating and size that fit the task. Try a sample on the real job. Ask for the certificate and data sheet of that exact model. This is how to choose industrial safety gloves with less risk.
-
What should I look for when buying gloves?
Look for a glove that matches the hazard. Check the cut level, size range and coating on the product page. Ask for the data sheet and the certificate. Ask for the lead time in the quote too. Do all of this before you order.
-
What cut level do ZIMAI cut-resistant gloves have?
72410 EN 목록 388 cut level 5 on the full hand. It lists puncture level 2 on the palm. 71258 lists level D. 71613 그리고 78473 list level C. The site does not say which standard the letter levels follow. So check each data sheet.
-
How do I pick the right glove size?
Use the size range on the product page. 예를 들어, 12185 comes in 6/XS–11/XXL. Order a sample and test it on the real task. Ask the supplier for a size chart. The ZIMAI site has none. Sizes show as numbers, letters or both.
-
Should I buy disposable or reusable gloves?
Choose disposable gloves when cleaning cannot remove the contamination. Reusable gloves can cost less if you use them often and they stay lightly contaminated. Look at the cost per use, not the price of one pair. ZIMAI lists both kinds.
결론
Buying gloves can be simple. Know the hazard. Match the glove. Ask for the papers. This is how to choose industrial safety gloves that fit the job.
Want one supplier for hand protection and other PPE? 상하이 Zimai Safety Technology Co., Ltd . 잘 맞는다. 해당 사이트에는 ISO가 나열되어 있습니다. 9001:2015 ISO 14001:2015 인증. Send your task list and size range to get a quote.
상하이 Zimai Safety Technology Co., Ltd.