What Should Buyers Check Before Ordering ESD Safety Shoes? Evaluare, Prinde & Fit

Does the word “ESD” on a product page mean the shoe is right for work where static is a risk? Nu întotdeauna. A wrong order costs money. It can also put workers at risk.

This ESD safety shoes buyer checklist helps you check three things: rating, grip and fit.

Product facts come from Shanghai Zimai Safety Technology Co., Ltd. (Zimai). ZIMAI makes and sells safety gear (EIP) from Shanghai. It has over 30 years of experience in exporting PPE.

What to Check First

Before you order, check six things:

1. The marking on the shoe
2. The electrical resistance data
3. The slip resistance (SR) mark
4. The toe protection
5. The size range
6. The supplier’s certificates

Ask for the ESD test report for the exact model.

Încălțăminte de siguranță ESD Buyer Checklist: 6 Checks Before You Place an Order

Six simple checks can save you from a bad order. For each one, read the label. Then ask the seller one question. Write down each answer. Use the same checks for every seller.

Six-Point Order Check

Check	What to look for	Ask the supplier
Standard	ÎN ISO 20345:2022 on the label	Which version of the test report covers
ESD marking	“ESD” in the shoe marking	The ESD test report for this model
Prinde	SR mark	Which slip test was used
Degetul de la picioare	Toe cap type	Toe cap material and class
Fit	Gama de dimensiuni, low or high cut	Size chart
Proof	Factory Certificate	Certificate copies for this model

What Is ESD Footwear Meant to Do Around Static-Sensitive Work?

ESD footwear helps control static electricity at work. Electrostatic discharge is a quick jump of static from one thing to another. It can happen when a person touches a part, a tool or a surface. People can build up static as they walk on a floor.

Only One Part of the Plan

A shoe cannot control static alone. It works with other steps in the work area.

Still a Safety Shoe

The shoe must also protect the foot. So toe protection and grip matter as much as the ESD mark.

Are ESD Safety Shoes the Same as Antistatic Shoes?

Nu întotdeauna. ÎN ISO 20345 defines “A” (antistatic) as a separate class. It has a fixed resistance range. Shoe data designated ESD test data must be sent. The two markings are not the same. You may have a shoe that says “ESD” but no resistance range. Ask to see the report before you pay. The report shows what was tested, how it was tested and the outcome. Guess not.

What the Standard Lists

Two electrical classes are shown on the ZIMAI Standard page:

• O: Antistatic, between 0.1 şi 1000 MΩ.
• C: partially conductive, electrical resistance ≤100 Ω.

A Note on Product Pages

The ESD8600, ESD8601 and ESD8901 pages mention “ESD. They do not demonstrate any resistance span. They have no “O” stamp. So don’t call these sneakers “O” graded. “Ask for the data.

How to Read “ÎN ISO 20345:2022 S1 PL SR ESD”

The marking is a brief code. Each aspect is important in itself. The code indicates the standard, safety class and supplementary claims. Please read each section before ordering.

Marking Decoder

Mark	Meaning (from the site)
ÎN ISO 20345:2022	Safety footwear standard. The site calls it the current version.
S1	Safety class. Check it against the real standard before you rely on what S1 includes.
PL	Non-metal puncture insert, 4.5 mm test nail
SR	Extra slip resistance level (ceramic tile with glycerol, foreign parts and heel)
ESD	Marked on the product page. No resistance range is shown.

Focus on the ESD section the most. A mark on a page is only an assertion. The test report is the evidence.

Electrical Resistance and ESD Test Reports: What Should Buyers Ask to See?

Request to see the ESD test report for the precise model. A sign on a product page isn’t enough. Static is handled via a shoe’s electrical resistance. A report can only indicate that. Two shoes may share a same mark, and resemble each other.

Their test findings might still vary. A report for a comparable model is not excellent. You have to match the sneaker you wish to purchase. Check the model number and date of manufacture.

Your ActionList

1. Please ask for the test report.
2. Be sure that the model number on the report corresponds to your purchase.
3. Please verify the report date.

How to Ask

Please include the model number with your query. Eg, enter “ESD8600” and request the report for it. You may go to the ZIMAI Inquiry page .

Grip That Holds: Rezistenta la alunecare (SR) Explained

The SR mark is another claim for improved grip. All încălțăminte de siguranță tested to EN ISO 20345:2022 are already subject to a basic slip test. SR provides a tougher exam. Most important is grip on wet or slick flooring. The test is done in a lab using ceramic tile. Your floor could be different. So look at the mark as a positive indicator, not a guarantee. Ask the vendor what slip test was utilized.

Two Tests, Two Levels

• Basic level (necesar): ceramic tiles with sodium lauryl sulphate (săpun). The test checks forepart and heel slip.
• SR level (extra): ceramic tiles with glycerol. It also checks forepart and heel slip.

The ZIMAI ESD Models

They have a double-density PU/PU outsole and the SR brand. They are not listed on the page as oil resistant (FO) or water resistant (WR). Don’t assume either one. Ask whether your flooring needs it.

Toe Protection and Metal-Free Build: What Does the Label Tell You?

The label informs you the shoe is toe-protected. According to the ZIMAI Standard website, every safety footwear provides 200 joules impact and 15,000 newtons compression toe protection. Force from falling item is measured in joules.

Crushing force is measured in Newtons. If you operate with heavy parts or tools, both numbers important. Match them to the hazards on your site. Then question the vendor about the material and toe cap class.

The ESD Models

Models have a fiberglass toe cap and a composite midsole. The product label states “Metal Free”.

The PL Point

PL is a non-metal insert tested with 4.5mm test nail. It looks for holes in the sole.

Shoe Sizing and Cut: Low Cut or High Cut, Dimensiune 36 la 48?

Low cut for the ESD8600 and the ESD8601. ESD8901 is high cut. All three are available in sizes 36–48. Begin with a size chart for your shoe sizing.

Buyer Tips

• Seek for a sizing chart prior to placing a purchase.
• Evaluate the size run in relation to the actual foot sizes of your squad.
• Cut to size according to the task at hand. A lower cut is more airy. More of the ankle is concealed by the high cut.

The site lists no US or UK sizes, no widths and no half sizes. Ask the supplier if you need them.

A Real Example: ZIMAI ESD8600, ESD8601 and ESD8901 Specs

These three models share most listed details. Only the cut is different on the site.

Model Spec

	ESD8600	ESD8601	ESD8901
Tăiați	Low cut	Low cut	High cut
Superior	Dark blue cow split suede leather	Same	Same
Deget de la picioare	Fiberglass	Fiberglass	Fiberglass
Talpă intermediară	Composite	Composite	Composite
Talpă exterioară	Double density PU/PU	Same	Same
Tongue and collar	Gray leather and green oxford nylon	Same	Same
Dimensiune	36–48	36–48	36–48
Marking	ÎN ISO 20345:2022 S1 PL SR ESD	Same	Same

No other differences are listed. Ask the supplier before you assume any.

Supplier Proof That Matters: Factory Certification and Quality System

Good evidence is found in documents you can verify. Here are the statistics listed on the ZIMAI About page:

• ISO 9001:2015 & ISO 14001:2015 Certificari.
• Some factories are audited by SEDEX and BSCI.
• Cu peste 30 ani de experiență în exportul EIP.
• One stop supplier, de la protecția capului până la protecția picioarelor, with “good quality and on-time delivery”

CE Certificates

Most of the safety shoes are CE certified, the site states. The term is most. Does not imply all models included. So do ask for the certificate for your model. Verify that the model number on it matches your order. Do this before you pay, not after the shoes are delivered.

Trade Shows

ZIMAI will be at A+A Düsseldorf (2023, 2025), NSC Denver (2025), și al 139-lea Târg de Canton (2026). These concerts were in Germany, STATELE UNITE ALE AMERICII, and China. The photographs reveal that the firm is busy in its trade. Pictures are not paper. Test report and certificate still required.

Common Ordering Mistakes

• Trusting the “ESD” word without a report.
• Thinking “ESD” şi “O” are the same mark.
• Guessing the shoe resists oil or water when the listing does not say so.
• Ordering sizes for a whole team without a size chart.
• Skipping the certificate for the exact model.

Questions to Send Before You Pay

Paste these into your inquiry. They turn the ESD safety shoes buyer checklist into one message.

1. Numărul modelului (de exemplu, ESD8600).
2. The ESD test report for that model.
3. A copy of the certificate for that model.
4. The size chart.
5. Lead time, in writing.
6. Packing details.

FAQ

• Are ESD safety shoes the same as antistatic shoes?

Not all the time. ÎN ISO 20345 has its own class, “A” (antistatic) 0.1 la 1000 MΩ. Each shoe designated “ESD” should have its own test data. The vendor should be asked for the report.

• What does S1 PL SR ESD mean on a safety shoe?

It is a code on the shoe. S1 is the safety class. PL is a non-metal puncture insert, tested with a 4.5 mm nail. SR is extra slip resistance. ESD is the static mark.

• Do ESD safety shoes have toe protection?

Da. According to the ZIMAI Standard website, every safety footwear has a toe protection of 200 joules impact and 15,000 newtons compression. The ZIMAI ESD shoes are made with a fiberglass toe.

• What sizes do ZIMAI ESD safety shoes come in?

ZIMAI ESD8600, ESD8601, and ESD8901 are available in sizes 36-48. Order according to the size chart. No further size statistics are mentioned on the site.

• What documents should I ask for before ordering ESD safety shoes?

Ask for the ESD test results, a copy of the certificate and the sizing chart of your precise model. Ask about lead time and packaging specifications in writing.

Concluzie

Check the mark of the shoe, the statistics of resistance, the grip, the protection of the toes, the sizes and the certifications. Then request the report. Do this before you pay up.

ESD shoes (low and high cut) (size 36–48), Shanghai Zimai Safety Technology Co., Ltd . Certified to ISO 9001:2015 și ISO 14001:2015. It’s also decked up in safety gear from head to toe. Questions? Send the model number, such ESD8600. Make a query or utilize Obțineți un citat .